Configuring Frame Relay Parameters

Frame Relay pipes are used to provide customer-to-customer Frame Relay PVCs or to interconnect individual Frame Relay clouds.

Frame Relay parameters can only be configured in SONET/SDH and channelized TDM MDA contexts.

The following example shows a channelized interface configuration:

A:ALA-7>config>port# info detail
----------------------------------------------
        description "DS3/E3"
...
        tdm
            buildout long
            ds3 ds3
                type t3
                channelized
                clock-source loop-timed
                framing c-bit
                no feac-loop-respond
                no mdl
                no mdl-transmit
                no loopback
                report-alarm ais los
                no report-alarm oof rai looped
                no shutdown
            exit
            ds1 ds1-1
                shutdown
                framing esf
                no loopback
                report-alarm ais los
                no report-alarm oof rai looped
                channel-group 1
                    description "DS3/E3"
                    mode access
                    encap-type frame-relay
                    no mtu
                    no mac
                    timeslots 1
                    speed 64
                    crc 16
                    frame-relay
                        lmi-type itu
                        mode dte
                        n393dce 4
                        n393dte 4
                        n391dte 6
                        n392dce 3
                        n392dte 3
                        t391dte 10
                        t392dce 15
                    exit
                    no shutdown
                exit
            exit
        exit
        no shutdown
----------------------------------------------
A:ALA-7>config>port#