Nokia Router Configuration Process

Table 1 lists the tasks necessary to configure MPLS applications functions.

This guide is presented in an overall logical configuration flow. Each section describes a software area and provides CLI syntax and command usage to configure parameters for a functional area.

Table 1. Configuration Process
Area	Task	Section
MPLS and RSVP protocol configuration	MPLS Configuration	Common Configuration Tasks
	Configure RSVP parameters	Configuring RSVP Parameters
	MPLS configuration management	MPLS Configuration Management Tasks
	RSVP configuration management	RSVP Configuration Management Tasks
GMPLS protocol configuration	Configure LMP and IPCC	LMP and IPCC Configuration
	Configure MPLS paths for GMPLS	Configuring MPLS Paths for GMPLS
	Configure RSVP in GMPLS	Configuring RSVP in GMPLS
	Configure a GMPLS LSP on the UNI	Configuring a GMPLS LSP on the UNI
	Configure Bandwidth	Bandwidth
	Configure end-to-end GMPLS recovery	Configuration of End-to-End GMPLS Recovery
	Configure IP and MPLS in an overlay network to use a GMPLS LSP	Configuring IP and MPLS in an Overlay Network to Use a GMPLS LSP
Label Distribution Protocol (LDP) configuration	Configure LDP	Configuring LDP with CLI
Label Distribution Protocol (LDP) configuration	LDP configuration management	LDP Configuration Management Tasks