Enter the pw-port list instance
16.0.R4
All
Pseudowire port ID
1 to 32767
This element is part of a list key.
16.0.R4
All
Text description
configure pw-port number description string
1 to 160
PW Port
16.0.R4
All
Dot1q Ethertype on the PW port
configure pw-port number dot1q-etype string
33024
16.0.R4
All
Encap type of the pseudo-wire port
configure pw-port number encap-type keyword
dot1q
dot1q, qinq
16.0.R4
All
Enter the epipe list instance
1
The following are part of a choice: epipe or sdp.
16.0.R4
All
Administrative service name
This element is part of a list key.
16.0.R4
All
Administrative state of the pseudowire port
configure pw-port number epipe reference admin-state keyword
enable
enable, disable
16.0.R4
All
Enter the egress context
16.0.R4
All
Enter the shaper context
16.0.R4
All
Intermediate destination ID applicable to ESM PW SAPs
1 to 32
16.0.R4
All
Virtual port name of the shaper on the egress side
1 to 32
16.0.R4
All
![]() | Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
FPE ID
configure fwd-path-ext fpe number
16.0.R4
All
Name of the operational group to monitor
configure pw-port number epipe reference monitor-oper-group reference
configure service oper-group string
16.0.R4
All
QinQ Ethertype encapsulation on the PW port
configure pw-port number qinq-etype string
33024
16.0.R4
All
Enter the sdp list instance
1
The following are part of a choice: epipe or sdp.
16.0.R4
All
SDP ID
This element is part of a list key.
16.0.R4
All
Administrative state of the pseudowire port
configure pw-port number sdp reference admin-state keyword
disable
enable, disable
16.0.R4
All
Service MTU size to be used
configure pw-port number sdp reference adv-service-mtu number
0 to 9782
bytes
21.7.R1
All
Whether using the control-word is preferred or not. This bit is exchanged with LDP peer during pseudowire negotiation time.
configure pw-port number sdp reference control-word boolean
false
19.10.R1
All
Enter the egress context
16.0.R4
All
Enter the shaper context
16.0.R4
All
Intermediate destination ID applicable to ESM PW SAPs
1 to 32
16.0.R4
All
Secondary shaper applicable to PW SAPs
1 to 32
16.0.R4
All
Virtual port applicable to all PW SAPs
1 to 32
16.0.R4
All
![]() | Warning: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. |
Egress VC label representing the PW port
16 to 1048575
16.0.R4
All
Enable entropy level insertion on the PW port
configure pw-port number sdp reference entropy-label boolean
When configured to true, the entropy label and ELI are inserted in packets for which at least one LSP in the stack for the far-end of the tunnel used by the service has advertised entropy label capability.
When configured to false, entropy label insertion on the PW port is not allowed.
The entropy label is only applicable to PW ports bound to a static port; it is not applicable to ports using an FPE.
false
21.5.R1
All
Enter the ingress context
16.0.R4
All
![]() | Warning: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. |
Ingress VC label representing the PW-port
1 to 1048575
16.0.R4
All
Name of the operational group to monitor
configure pw-port number sdp reference monitor-oper-group reference
configure service oper-group string
16.0.R4
All
![]() | Warning: Modifying this element recreates the parent element automatically for the new value to take effect. |
Virtual Circuit ID signaled to the peer
1 to 4294967295
This element is mandatory.
16.0.R4
All
![]() | Warning: Modifying this element toggles the admin-state of the parent element automatically for the new value to take effect. |
Forwarding mode for the PW-port
ether
ether, vlan
16.0.R4
All
VLAN VC tag
configure pw-port number sdp reference vlan-vc-tag number
0 to 4094
16.0.R4
All