Configuring a VPLS management interface

Use the following CLI syntax to create a VPLS management interface:

CLI syntax:


    config>service>vpls# interface ip-int-name
    address ip-address[/mask] [netmask]
    arp-timeout seconds
    description description-string
    mac ieee-address
    no shutdown
    static-arp ip-address ieee-address

The following example shows the configuration.

A:ALA-49>config>service>vpls>interface# info detail
---------------------------------------------
               no description
               mac 14:31:ff:00:00:00
               address 10.231.10.10/24
               no arp-timeout
               no shutdown
---------------------------------------------
A:ALA-49>config>service>vpls>interface#