The following identification related AVPs are sent to the PCRF through Gx messages to aid in IP-CAN session identification:
subscription-id AVP (RFC 4006, §8,46)
This can be used to identify the subscribers on the PCRF. For the supported fields within the subscription-id AVP, see the 7750 SR Gx AVPs Reference Guide.
NAS-Port-Id AVP (RFC 2869 / §5.17; RFC 4005 / §4.3)
AN-GW-Address AVP (3GPP 29.212 / §5.3.49)
Calling-Station-ID AVP (RFC 4005 / §4.6)
user-equipment-info AVP (RFC 4006, §8.49)
logical-access-id AVP (ETSI TS 283 034)
This contains the circuit-id from DHCPv4 Option (82,1) or interface-id from DHCPv6 option 18. The vendor-id is set to ETSI (13019).
physical-access-id AVP (ETSI TS 283 034)
This contains remote-id from DHCPv4 option (82,2) or DHCPv6 option 37. The vendor-id is set to ETSI (13019).
Physical and logical access IDs are also defined in BBF TR-134 (§7.1.4.1).
Table: PDP to PEP direction parameters shows PDP to PEP direction parameters.
| Parameter | Category | Type | Description |
|---|---|---|---|
Logical access ID |
User identification |
Octet String |
The identity of the logical access to which the user device is connected. It is stored temporarily in the AAA function connected to PDP. This corresponds to the Agent ID in case of IPv4 and to the interface ID of DHCP option 82 for IPv6. |
Physical Access ID |
User identification |
UTF8String |
The identity of the physical access to which the user device is connected. It is stored temporarily in the AAA function connected to the PDP. This corresponds to the Agent Remote ID. |
A Subscription-id AVP is most commonly used to identify the subscriber but any combination of the above listed parameters can be used to uniquely identify the IP-CAN session on PCRF and consequently identify the subscriber.
In addition, NAS-Port, NAS-Port-Type, and Called-Station-ID AVPs from RFC 4005 (§4.2, §4.4, §4.5) can be passed to the PCRF.