The following command displays the state of the leading pool (dual-homing section toward the bottom of the command output):
*A:Dut-B# show router 500 nat pool "nat500-pool"
===============================================================================
NAT Pool nat500-pool
===============================================================================
Description : (Not Specified)
ISA NAT Group : 1
Pool type : largeScale
Admin state : inService
Mode : auto (napt)
Port forwarding dyn blocks reserved : 0
Port forwarding range : 1 - 1023
Port reservation : 2300 blocks
Block usage High Watermark (%) : (Not Specified)
Block usage Low Watermark (%) : (Not Specified)
Subscriber limit per IP address : 65535
Active : true
Deterministic port reservation : (Not Specified)
Last Mgmt Change : 02/17/2014 09:41:43
===============================================================================
===============================================================================
NAT address ranges of pool nat500-pool
===============================================================================
Range Drain Num-blk
-------------------------------------------------------------------------------
192.168.1.0 - 192.168.1.255 0
-------------------------------------------------------------------------------
No. of ranges: 1
===============================================================================
===============================================================================
NAT members of pool nat500-pool ISA NAT group 1
===============================================================================
Member Block-Usage-% Hi
-------------------------------------------------------------------------------
1 < 1 N
2 < 1 N
3 < 1 N
4 < 1 N
5 < 1 N
6 < 1 N
-------------------------------------------------------------------------------
No. of members: 6
===============================================================================
===============================================================================
Dual-Homing
===============================================================================
Type : Leader
Export route : 10.0.0.3/32
Monitor route : 10.0.0.2/32
Admin state : inService
Dual-Homing State : Active
===============================================================================
===============================================================================
Dual-Homing fate-share-group
===============================================================================
Router Pool Type
-------------------------------------------------------------------------------
Base nat0-pool Follower
vprn500 nat500-pool Leader
vprn501 nat501-pool Follower
vprn502 nat502-pool Follower
-------------------------------------------------------------------------------
No. of pools: 4
===============================================================================
The following command displays the state of the follower pool (dual-homing section toward the bottom of the command output):
*A:Dut-B# show router 501 nat pool "nat501-pool"
===============================================================================
NAT Pool nat501-pool
===============================================================================
Description : (Not Specified)
ISA NAT Group : 1
Pool type : largeScale
Admin state : inService
Mode : auto (napt)
Port forwarding dyn blocks reserved : 0
Port forwarding range : 1 - 1023
Port reservation : 2300 blocks
Block usage High Watermark (%) : (Not Specified)
Block usage Low Watermark (%) : (Not Specified)
Subscriber limit per IP address : 65535
Active : true
Deterministic port reservation : (Not Specified)
Last Mgmt Change : 02/17/2014 09:41:43
===============================================================================
===============================================================================
NAT address ranges of pool nat501-pool
===============================================================================
Range Drain Num-blk
-------------------------------------------------------------------------------
192.168.2.0 - 192.168.2.255 0
192.168.3.0 - 192.168.3.255 0
-------------------------------------------------------------------------------
No. of ranges: 2
===============================================================================
===============================================================================
NAT members of pool nat501-pool ISA NAT group 1
===============================================================================
Member Block-Usage-% Hi
-------------------------------------------------------------------------------
1 < 1 N
2 < 1 N
3 < 1 N
4 < 1 N
5 < 1 N
6 < 1 N
-------------------------------------------------------------------------------
No. of members: 6
===============================================================================
===============================================================================
Dual-Homing
===============================================================================
Type : Follower
Follow-pool : "nat500-pool" router 500
Dual-Homing State : Active
===============================================================================
===============================================================================
Dual-Homing fate-share-group
===============================================================================
Router Pool Type
-------------------------------------------------------------------------------
Base nat0-pool Follower
vprn500 nat500-pool Leader
vprn501 nat501-pool Follower
vprn502 nat502-pool Follower
-------------------------------------------------------------------------------
No. of pools: 4
===============================================================================
The following command lists all the pools that are configured along with the NAT inside/outside routing context.
*A:Dut-B# show service nat overview
===============================================================================
NAT overview
===============================================================================
Inside/ Policy/ Type
Outside Pool
-------------------------------------------------------------------------------
vprn550 lsn-policy_unused default
Base nat0-pool
vprn550 lsn-policy_nat1 destination prefix
vprn500 nat500-pool
vprn550 lsn-policy-nat2 destination prefix
vprn501 nat501-pool
vprn551 lsn-policy_unused default
Base nat0-pool
vprn551 lsn-policy-nat3 destination prefix
vprn501 nat501-pool
vprn551 lsn-policy-nat4 destination prefix
vprn502 nat502-pool
vprn552 lsn-policy_unused default
Base nat0-pool
vprn552 lsn-policy-nat5 destination prefix
vprn502 nat502-pool
===============================================================================