dump router-name
tools
Supported on all 7210 SAS platforms as described in this document
This command enables context to display information for debugging.
Specifies a router name, up to 32 characters.
accounting-policy acct-policy-id flash-write-count [clear]
tools>dump
Supported on all 7210 SAS platforms as described in this document
This command dumps the total count of flash writes for the accounting policy specified by the user. The clear option allows the user to clear the count maintained per accounting policy and restart the counter.
Specifies the total number of flash writes up to the present for the accounting policy specified by accounting policy 'id'.
Specifies the accounting policy.
Clears statistics.
top-active-meps [rx-sort | tx-sort] [clear]
tools>dump>eth-cfm
7210 SAS-Dxp, 7210 SAS-K 2F1C2T, 7210 SAS-K 2F6C4T, and 7210 SAS-K 3SFP+ 8C
This command displays, and optionally clears, the most active MEPs on the system.
sorts total in both directions
Specifies to sort in the receive (Rx) direction.
Specifies to sorts in the transmit (Tx) direction.
Clears the current counters.
eth-ring ring-index [clear]
eth-ring control-sap-tag port-id [list-in-use | next-available]
tools>dump
Supported on all 7210 SAS platforms as described in this document
This command displays Ethernet-ring information.
Specifies the ring index.
Clears statistics.
lag lag-id lag-id
tools>dump
Supported on all 7210 SAS platforms as described in this document
This command displays LAG information.
Specifies an existing LAG ID.
*A:7210 SAS>tools>dump# lag lag-id 1
Port state : Up
Selected subgrp : 1
NumActivePorts : 2
ThresholdRising : 2
ThresholdFalling: 0
IOM bitmask : 2
Config MTU : 1522
Oper. MTU : 1522
Bandwidth : 200000
multi-chassis : NO
------------------------------------------------------------------------------------
Indx PortId RX pkts TX pkts State Active Port Cfg Oper Speed BW AP CS
Pri Mtu Mtu
------------------------------------------------------------------------------------
0 1/1/
1 1 1 Up yes 32768 1522 1522 1000 100000 0 2
1 1/1/
2 0 0 Up yes 32768 1522 1522 1000 100000 0 2
ldp-treetrace {prefix ip-prefix/mask | manual-prefix ip-prefix/mask} [path-destination ip-address] [trace-tree]
tools>dump
7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C
This command displays LDP treetrace information.
The tools dump ldp-treetrace prefix command displays entries only if ldp-treetrace is enabled, that is, configure test-oam ldp-treetrace no shutdown is configured.
Specifies the IP prefix and host bits.
The following output is an example of LDP treetrace information.
Sample output — automated LDP treetrace*A:Dut-B# tools dump ldp-treetrace prefix 10.20.1.6/32
Discovered Paths:
===================
Id PathDst EgrNextHop ReplyRtrAddr DiscoveryTime
DiscoveryTtl ProbeState ProbeTmOutCnt RtnCode
=== ================ ================ ================ ===================
001 127.1.0.255 10.10.41.2 10.10.9.6 11/09/2010 16:15:54
002 OK 00 EgressRtr
002 127.2.0.255 10.10.42.2 10.10.9.6 11/09/2010 16:15:54
002 OK 00 EgressRtr
003 127.3.0.255 10.10.43.2 10.10.9.6 11/09/2010 16:15:54
002 OK 00 EgressRtr
004 127.4.0.255 10.10.44.2 10.10.9.6 11/09/2010 16:15:54
002 OK 00 EgressRtr
005 127.5.0.255 10.10.45.2 10.10.9.6 11/09/2010 16:15:54
002 OK 00 EgressRtr
ldp-treetrace discovery state: Done
ldp-treetrace discovery status: ' OK '
Total number of discovered paths: 5
Total number of probe-failed paths: 0
Total number of failed traces: 0
*A:Dut-B#
persistence
tools>dump
Supported on all 7210 SAS platforms as described in this document
Commands in this context display persistence information for debugging.
summary
tools>dump>persistence
Supported on all 7210 SAS platforms as described in this document
This command displays persistence summary information for debugging.
A:ALA-B# tools dump persistence summary
=====================================================================
Persistence Summary on Slot A
=====================================================================
Client Location Entries in use Status
---------------------------------------------------------------------
xxxxxx cf1:\l2_dhcp.pst 200 ACTIVE
---------------------------------------------------------------------
Persistence Summary on Slot B
=====================================================================
Client Location Entries in use Status
---------------------------------------------------------------------
xxxxxx cf1:\l2_dhcp.pst 200 ACTIVE
---------------------------------------------------------------------
A:ALA-B#
system
tools>dump
Supported on all 7210 SAS platforms as described in this document
This command dumps tools for system information.
cpu-pkt-stats
tools>dump>system
Supported on all 7210 SAS platforms as described in this document
This command dumps statistics for CPU traffic.
system-resources slot-number [sap-ingress-qos] [associations]
system-resources slot-number egress-acls
system-resources slot-number ingress-acls
system-resources mcast-groups
tools>dump
7210 SAS-K 2F6C4T (Network Mode) and 7210 SAS-K 3SFP+ 8C (Network Mode)
This command displays system resource information.
Specifies a slot to view system resources information.
Specifies details about usage of resources allocated for QoS classification and different match criteria under QoS classification.
Specifies all SAPs that use each chunk ID.
Specifies details on usage of resources allocated for egress filter resource consumption.
Specifies details on usage of resources allocated for ingress filter resource consumption.
Specifies details on usage of resources allocated for multicast group resource consumption.
The following outputs are examples of system resources information:
Sample output: SAP ingress QoS and SAP egress aggregate meter for 7210 SAS-D
Sample output: tools dump system-resources for 7210 SAS-K 2F1C2T
The following table describes tools>dump>system-resource SAP ingress QoS output fields.
|
Labels |
Descriptions |
|---|---|
|
Total Chunks Configured |
Displays the total number of chunks configured for use by SAP ingress QoS classification across all the match criteria |
|
Total Chunks Available |
Displays the total number of chunks alloted by software for use by SAP ingress QoS classification across all the match criteria |
|
Number of Chunks in Use |
Displays the total number of chunks in use by SAP for SAP ingress QoS classification |
|
Number of Free Chunks |
Displays the total number of chunks available for use by SAP for SAP ingress QoS classification |
|
Number of Chunks in use for IP match |
Displays the total number of chunks in use for by SAP that use IP classification match criteria in the SAP ingress QoS policy |
|
Number of Chunks in use for IPv6 match |
Displays the total number of chunks in use for by SAP that use IPv6 classification match criteria in the SAP ingress QoS policy |
|
Number of Chunks in use for MAC match |
Displays the total number of chunks in use for by SAP that use MAC classification match criteria in the SAP ingress QoS policy |
|
Classification Entries |
The total number of Classification entries that are available/allocated/free per chunk Information is displayed only for chunks that are in use. |
|
Meters |
The total number of Meters that are available/allocated/free per chunk Information is displayed only for chunks that are in use. |
|
Number of Chunks available for use with IP match criteria |
Displays the total number of chunks in use for by SAP that use IP classification match criteria in the SAP ingress QoS policy This assumes all of the free chunks are alloted to IP classification match criteria. |
|
Number of Chunks available for use with IPv6 match criteria |
Displays the total number of chunks in use for by SAP that use IPv6 classification match criteria in the SAP ingress QoS policy This assumes all of the free chunks are alloted to IPv6 classification match criteria. |
|
Number of Chunks available for use with MAC match criteria |
Displays the total number of chunks in use for by SAP that use MAC classification match criteria in the SAP ingress QoS policy This assumes all of the free chunks are alloted to MAC classification match criteria. |
*A:7210-SAS>tools>dump# system-resources sap-ingress-qos
Sap Resource Manager info at 001 d 10/11/12 04:42:00.043:
Sap Ingress Resource Usage for Slot #1, Cmplx #0:
Total Chunks Configured : 6
Total Chunks Available : 6
Number of Chunks in Use : 1
Number of Free Chunks : 5
Number of Chunks in use for IP match :0
Number of Chunks in use for IPv6 match :0
Number of Chunks in use for MAC match :1
| Classification Entries | Meters
Chunk | Type | Total |Allocated| Free | Total |Allocated| Free
--------+------+--------+---------+--------+--------+---------+---------
0| Mac| 512| 2| 510| 256| 1| 255
Number of Chunks available for use with IP match* : 5
Number of Chunks available for use with IPv6 match* : 0
Number of Chunks available for use with MAC match* : 5
* - Assumes all remaining chunks are used
*A:Dut-A>tools>dump#
The following example displays the resource utilization for SAP ingress QoS and SAP egress aggregate meter for the 7210 SAS-D, and Table: Output fields: tools dump system-resource SAP ingress QoS and Table: Output fields: tools dump system-resource describe the output fields.
*A:7210SAS>tools>dump# system-resources sap-ingress-qos
Sap Resource Manager info at 007 h 01/01/70 07:18:39.032:
Sap Ingress Resource Usage for Slot #1, Cmplx #0:
Total Chunks Configured : 1
Total Chunks Available : 1
Number of Chunks in Use : 0
Number of Free Chunks : 1
Number of Fixed Chunks : 1
Number of Chunks in use for IP match : 0
Number of Chunks in use for IPv6 match : 0
Number of Chunks in use for IP + Mac match : 0
Number of Chunks in use for MAC match : 0
Number of pre-allocated Chunks with MAC match# :1
| Classification Entries | Meters
Chunk | Type | Total |Allocated| Free | Total |Allocated| Free
--------+------+--------+---------+--------+--------+---------+---------
1| Mac| 128| 2| 126| 64| 1| 63
Number of Chunks available for use with IP match* : 1
Number of Chunks available for use with IPv6 match* : 0
Number of Chunks available for use with Ip + Mac match* : 1
Number of Chunks available for use with MAC match* : 1
# - Chunk 1 with 128 entries is statically assigned to SAP ingress QoS MAC criteria.
* - Assumes all remaining chunks are used
*A:7210SAS>tools>dump#*A:NS1050C0070>tools>dump# system-resources
Resource Manager info at 007 h 01/01/70 07:17:52.952:
Hardware Resource Usage per Node:
| Total | Allocated | Free
-------------------------------+-----------+-----------+------------
Hardware Resource Usage for Slot #1, CardType iom-sas, Cmplx #0:
| Total | Allocated | Free
-------------------------------+-----------+-----------+------------
SAP Ingress QoS Policies | 1791| 1| 1790
Access Egr. QoS Policies | 255| 1| 254
SAP Ingress Aggregate-Meter | 128| 0| 128
Shared Qos Ingress Meters | 128| 0| 128
Shared Qos Ingress CAM Entries | 256| 0| 256
Mac Qos Ingress Meters | 64| 1| 63
Mac Qos Ingress CAM Entries | 128| 2| 126
IPv4 Qos Ingress Meters | 0| 0| 0
IPv4 Qos Ingress CAM Entries | 0| 0| 0
IPv6 Qos Ingress Meters | 0| 0| 0
IPv6 Qos Ingress CAM Entries | 0| 0| 0
IP + Mac Qos Ingress Meters | 0| 0| 0
IP + Mac Qos Ingress CAM Entries | 0| 0| 0
SAP Egress Agg-Meter Entries | 256| 0| 256
Network Ingress Meters | 90| 0| 90
Network Ing CAM Entries | 180| 0| 180
Port Scheduler Policies | 0| 0| 0
Ingress Shared ACL Entries | 512| 0| 512
Ingress Mac ACL Entries | 0| 0| 0
Ingress IPv4 ACL Entries | 0| 0| 0
Ing IPv6 128 bit ACL Entries | 0| 0| 0
Ing IPv6 64 bit ACL Entries | 0| 0| 0
Egress Shared ACL Entries | 0| 0| 0
Egress Mac only ACL Entries | 0| 0| 0
Egress Mac+IPv4 ACL Entries | 0| 0| 0
Egr IPv6 128 bit ACL Entries | 0| 0| 0
Egr Mac+IPv6 64 bit ACL Entries | 0| 0| 0
Ingress SAP Lookup Entries | 240| 0| 240
Egress Sap Counter Entries | 0| 0| 0
Num VLAN-ID/Range in Con Profile | 4096| 0| 4096
*A:7210SAS>tools>dump#
|
Labels |
Descriptions |
|---|---|
|
SAP Ingress QoS Policies |
Number of SAP ingress policies that are allowed to be configured (software-limit) |
|
Access Egr. QoS Policies |
Number of Access egress policies that are allowed to be configured (software-limit) |
|
SAP Egress QoS Policies |
Number of SAP egress policies that are allowed to be configured (software-limit) |
|
SAP Ingress Aggregate-Meter |
Number of SAP ingress aggregate meter (that is, per SAP aggregate meter) allowed (hardware limit) |
|
Shared Qos Ingress Meters |
Number of SAP ingress meter (that is, per FC meter) across all type of match-criteria (that is, MAC, IPv4, IPv6) (hardware limit) |
|
Shared Qos Ingress CAM Entries |
Number of SAP ingress classification CAM entries across all match-criteria (hardware limit) |
|
Mac Qos Ingress Meters |
Number of SAP ingress meter (that is, per FC meter) for MAC match-criteria (hardware limit) |
|
Mac Qos Ingress CAM Entries |
Number of SAP ingress classification CAM entries for MAC match-criteria (hardware limit) |
|
IPv4 Qos Ingress Meters |
Number of SAP ingress meter (that is, per FC meter) for IPv4 match-criteria (hardware limit) |
|
IPv4 Qos Ingress CAM Entries |
Number of SAP ingress classification CAM entries for IPv4 match-criteria (hardware limit) |
|
IPv6 Qos Ingress Meters |
Number of SAP ingress meter (that is, per FC meter) for IPv6 match-criteria (hardware limit) |
|
IPv6 Qos Ingress CAM Entries |
Number of SAP ingress classification CAM entries for IPv6 match-criteria (hardware limit) |
|
IP + Mac Qos Ingress Meters |
Number of SAP ingress meter (that is, per FC meter) for IP+MAC match-criteria (hardware limit) |
|
IP + Mac Qos Ingress CAM Entries |
Number of SAP ingress classification CAM entries for IP+MAC match-criteria (that is, IP and MAC criteria in the same policy) (hardware limit) |
|
DSCP Qos Ingress Meters |
Number of SAP ingress meter (that is, per FC meter) when using IP DSCP table-based classification (hardware limit) |
|
DSCP CAM Entries |
Number of CAM entries for IP DSCP table-based classification. (hardware limit) |
|
DSCP Profile |
Number of IP DSCP table-based classification resources (hardware limit) |
|
Network Ing Port Meters |
Number of Network Port Ingress Meters (hardware limit) |
|
Network Ing Port CAM Entries |
Number of Network port ingress classification CAM entries used for FC classification. (hardware limit) |
|
Network Ing IpIntf Meters |
Number of Network IP interface meters ( hardware limit) |
|
Network Ing IpIntf CAM Entries |
Number of Network IP interface ingress classification CAM entries used for FC classification. (hardware limit) |
|
Network MPLS Exp Profile Table |
Number of MPLS EXP to FC mapping table resources (hardware limit) |
|
Port Scheduler Policies |
Number of Port Scheduler policies that can be configured (software limit) |
|
Queue Management Policies |
Number of Queue Management policies that can be configured (software limit) |
|
Remark Policies |
Number of Remark policies that can be configured (software limit) |
|
Shared Egr QOS MAP Entries |
Number of entries in the remark table used for access SAP egress marking, network IP interface egress MPLS EXP marking, and access egress marking (hardware limit) |
|
Egress QOS CAM Entries |
Number of resources used for access SAP egress queuing (hardware limit) These resources are taken from the ingress-internal-tcam pool. |
|
Dscp Classification policies |
Number of IP DSCP table-based classification policy templates (software limit) |
|
Ingress Shared ACL Entries |
Number of CAM entries for ingress ACLs across all match-criteria (some of these are shared with SAP aggregate meter) See the system resource profile command description for more information. |
|
Ingress Mac ACL Entries |
Ingress ACL CAM entries for MAC match criteria |
|
Ingress IPv4 ACL Entries |
Ingress ACL CAM entries for IPv4 match criteria |
|
Ing IPv6 128 bit ACL Entries |
Ingress ACL CAM entries for IPv6 with 128-bit addresses match criteria |
|
Ing IPv6 64 bit ACL Entries |
Ingress ACL CAM entries for IPv6 with 64-bit addresses match criteria |
|
Egress Shared ACL Entries |
Number of CAM entries for egress ACLs across all match-criteria |
|
Egress Mac only ACL Entries |
Egress ACL CAM entries for MAC match criteria |
|
Egress Mac+IPv4 ACL Entries |
Egress ACL CAM entries for MAC and IPv4 match criteria |
|
Egr IPv6 128 bit ACL Entries |
Egress ACL CAM entries for IPv6 128-bit match criteria |
|
Egr Mac+IPv6 64 bit ACL Entries |
Egress ACL CAM entries for MAC + IPv6 64-bit match criteria |
|
Ingress SAP Lookup Entries |
Number of entries used to identify the SAP on port ingress (hardware limit) |
|
Egress Aggregate Meter |
Resources used for egress aggregate meter configured for access SAP (hardware limit) |
|
TWAMP/LT Entries |
Number of CAM entries used for TWAMP/TWAMP light (hardware limit) |
|
MEP Lookup CAM Entries |
The number of CAM entries (pre-ingress resource pool) used for CFM/Y.1731 Down MEP processing (hardware limit) |
|
DN MEP Entries |
Number of CAM entries in the ingress-internal-tcam pool for CFM/Y.1731 Down MEP processing (hardware limit) |
|
Num VLAN-ID/Range in Con Profile |
The number of VLAN IDs that can be listed explicitly in the connection profile, instead of specifying the range value (hardware limit) |
|
Egress TLS Mcast Entries |
The number of egress multicast entries (software limit) |
*A:dut-a# tools dump system-resources sap-ingress-qos associations
Sap Resource Manager info at 008 h 10/28/18 05:34:18.747:
==============================================================================
Service Access Points TCAM Ingress Resource Usage Slot #1, Cmplx #0:
==============================================================================
Sap Id SvcId Ing. Qos Chunk Num Type
Pol. Classifiers
==============================================================================
1/1/1:100 505 1 0 2 Mac
lag-6:300 505 1 0 2 Mac
1/1/1:200 506 1 0 2 Mac
lag-6:400 506 1 0 2 Mac
1/1/1:201 507 1 0 2 Mac
lag-6:401 507 1 0 2 Mac
1/1/1:202 508 1 0 2 Mac
lag-6:402 508 1 0 2 Mac
1/1/1:300 605 1 0 2 Mac
lag-6:100 605 21 0 32 Mac
1/1/1:400 606 1 0 2 Mac
lag-6:200 606 22 1 32 Dscp
1/1/1:401 607 1 0 2 Mac
lag-6:201 607 23 0 32 Mac
1/1/1:402 608 1 0 2 Mac
lag-6:202 608 24 1 32 Dscp
------------------------------------------------------------------------------
Number of SAPs : 16
------------------------------------------------------------------------------
==============================================================================
The following example displays the resource utilization for the 7210 SAS-K 2F1C2T, and Table: Output fields: discard statistics describes the output fields. The display for the 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C is similar.
*A:Dut-A>tools>dump# system-resources
Resource Manager info at 014 h 05/03/17 12:24:09.828:
Hardware Resource Usage per Node:
| Total | Allocated | Free
-------------------------------+-----------+-----------+------------
Hardware Resource Usage for Slot #1, CardType iom-sas, Cmplx #0:
| Total | Allocated | Free
-------------------------------+-----------+-----------+------------
SAP Ingress QoS Policies | 255| 1| 254
SAP Egress QoS Policies | 255| 1| 254
Network QoS Policies | 32| 1| 31
Network Queue QoS Policies | 32| 1| 31
Ingress Queues | 400| 2| 398
Egress Queues | 400| 2| 398
WRED Slope Profiles | 255| 1| 254
Ingress Meters | 511| 0| 511
Ingress CAM Entries | 0| 0| 0
Port Scheduler Policies | 0| 0| 0
Remark Policies | 63| 1| 62
Dot1p Classification policies | 63| 1| 62
Dscp Classification policies | 31| 0| 31
Ingress Shared ACL Entries | 510| 0| 510
Ingress Mac ACL Entries | | 0|
Ingress IPv4 ACL Entries | | 0|
Ing IPv6 128 bit ACL Entries | | 0|
Ing IPv6 64 bit ACL Entries | | 0|
Egress Shared ACL Entries | 1020| 128| 892
Egress ETH-CFM PVLAN ACL Entries | | 128|
Egress Mac ACL Entries | | 0|
Egress IPv4 ACL Entries | | 0|
Egr IPv6 128 bit ACL Entries | | 0|
Egr IPv6 64 bit ACL Entries | | 0|
Ingress Shared QoS Entries | 0| 0| 0
Ingress Mac QoS Entries | | 0|
Ingress IPv4 QoS Entries | | 0|
Ing IPv6 128 bit QoS Entries | | 0|
Ing IPv6 64 bit QoS Entries | | 0|
Ingress SAP Lookup Entries | 8| 0| 8
Num VLAN-ID/Range in Con Profile | 4096| 0| 4096
Egress TLS Mcast Entries | 147455| 1| 147454
*A:Dut-A>tools>dump#
*A:Dut-B# tools dump system-resources mcast-groups
============================================================
Multicast Group Usage
============================================================
Owner No. of Mcast Groups
------------------------------------------------------------
SVCMGR 2
MFIB 11
------------------------------------------------------------
Total Available 4080
Total Allocated 13
============================================================
*A:Dut-B#