Interface commands (access-uplink operating mode)

config
    - service
        - ies service-id [customer customer-id]
            - interface ip-int-name [create] 
            - [no] interface ip-int-name
                - address {[ip-address/mask | ip-address netmask} [broadcast all-ones | host-ones]}
                - no address
                - arp-timeout seconds
                - no arp-timeout
                - allow-directed-broadcasts
                - no allow-directed-broadcasts
                - description long description-string
                - no description
                - dhcp 
                    - description description-string 
                    - no description 
                    - gi-address ip-address [src-ip-addr] 
                    - no gi-address 
                    - [no] option 
                        - action {replace | drop | keep} 
                        - no action 
                        - [no] circuit-id [ascii-tuple | ifindex | sap-id | vlan-ascii-tuple] 
                        - [no] remote-id [mac | string string] 
                        - [no] vendor-specific-option 
                            - [no] client-mac-address 
                            - [no] sap-id 
                            - [no] service-id 
                            - string text 
                            - no string 
                            - [no] system-id 
                - icmp
                    - [no] mask-reply
                    - redirects [number seconds]
                    - no redirects
                    - ttl-expired [number seconds]
                    - no ttl-expired
                    - unreachables [number seconds]
                    - no unreachables
                - ip-mtu octets
                - no ip-mtu
                - [no] ipv6
                - [no] loopback
                - [no] sap sap-id [create]
                - [no] shutdown
                - [no] static-arp ip-address [ieee-address]