Configuring a SONET/SDH Port with Multiple DS1s in an MLPPP Bundle

Figure: Configuring SONET/SDH Network Port illustrates the setup to configure port 1/2/2 on 7705 SAR_118 as a SONET/SDH port with three DS1s on a channelized OC3/STM1 adapter card using SDH or SONET framing, and to configure the three DS1s for use in an MLPPP bundle on the network side.

This section provides information about the following topics:

• Configuring the Network Port

• Verifying the Configured Network Ports

• Verifying the Available Channelization

Figure: Configuring SONET/SDH Network Port